Weil McLain 2 Error Code
* memory. Flash code 3* LWCO circuit. Flash code 4* Unused. Internal fault, wate
Source: gv90-3__wlcm-gv90-series-2-iom.pdf
Stop searching through PDFs. Our AI assistant on WhatsApp is trained on official Weil McLain documentation and can diagnose this fault code and guide you through the repair in minutes.
5-day free trial — no credit card required.
Other Weil McLain Error Codes
prom parameters Unit Range Def Description Num. Address Description Low High Val
Firmwareversion Num 0 99 04
repeated 3 times in the last 24 hours LP Liquefied Petroleum (Propane) Gas LWCO
repeated 3 times in the last hour A41 Temperature sensor not or bad connected to
generated for 1 hour (con- secutive) See fault F15 A06 No flame after igni- tion
Supply sensor 1 fault Sensor damaged Wiring shorted Check the wiring or replace
Return sensor fault Sensor damaged Wiring shorted Check the wiring or replace th
DHW sensor fault Sensor damaged Wiring shorted Check the wiring or replace the s
the temperature display. The meaning of the error numbers are as follow: Table 3
Abbrevia- Description tion A01 No burner ignition after five attempts ADC Analog
Condition Correction A01 No burner ignition No gas Check the regular gas flow to
flashing (history/fault) ·Push “Reset" once · Push + to scroll error codes, refe