Convotherm E59 Error Code

What does Convotherm E59 mean?

Convotherm shows E59 — Rinse aid missing! — on the maxx, maxx pro, mini combi oven range. The manual lists these reasons: No rinse aid; Suction tube is drawing in air; Suction tube is kinked or pinched; and others. The control flags the fault and holds the affected function until the message is cleared.

Symptoms

• Display shows error code E59 (Rinse aid missing!)
• The affected function is interrupted until the fault is cleared

Common causes

• No rinse aid
• Suction tube is drawing in air
• Suction tube is kinked or pinched
• Pressure switch not reporting any pressure within 15 sec. of switching on the pump

Ask the AskWhiz AI about Convotherm E59

AskWhiz

online

Hi — I'm the Commercial Kitchen demo. Ask me anything in this domain.

What causes Convotherm E59?Step-by-step fix for Convotherm E59?Is Convotherm E59 safe to ignore?

MessageHelp me troubleshoot Convotherm E59

Diagnostic steps

1. Refill or replace the ConvoCare canister

   Fill up the ConvoCare canister If the canister is empty, replace the canister and confirm the message on the display

2. Seal the hose clamps

   Install and tighten hose clamps properly so that hose transitions are sealed properly

3. Check the hose for kinks

   Check the hose for kinks and fix the kinks

4. Vent the suction tube, then restart cleaning

   Suction tube is too long and must be vented separately: Acknowledge the message and start the cleaning again

When to call a professional

If E59 (Rinse aid missing!) does not clear after the steps above, note the message on the display and contact a qualified Convotherm service technician.