Perfect Fry FIRE EXTINGUISHER Error Code
SYSTEM ERROR - PLEASE CHECK FIRE EXTINGUISHER: loss of pressure in the fire extinguisher; system needs to be recharged.
Source: Perfect Fry/pfa__pfc-pfa-series-english-iom.pdf
What does Perfect Fry FIRE EXTINGUISHER mean?
This PFA-series SYSTEM ERROR indicates a loss of pressure in the PFS fire extinguisher system, which needs to be recharged. The fryer beeps twice, displays the alert, and de-energizes the heating element while the fans run. Because this protects against an oil fire, the unit should not be returned to service until the suppression system is recharged.
Symptoms
- LCD shows *** SYSTEM ERROR *** PLEASE CHECK FIRE EXTINGUISHER
- Fryer beeps twice to signal the error
- Heating element is de-energized while fans run
- PFS extinguisher pressure gauge indicates loss of charge
Common causes
- Loss of pressure in the PFS fire extinguisher system
- Suppression system has discharged or needs recharging
- Extinguisher service interval reached
Ask the AskWhiz AI about Perfect Fry FIRE EXTINGUISHER
AskWhiz
online
Diagnostic steps
Confirm the alert
Verify the LCD reads *** SYSTEM ERROR *** PLEASE CHECK FIRE EXTINGUISHER.
Stop using the fryer
Do not return the fryer to normal use while the suppression system is unpressurized.
Arrange a recharge
Call Perfect Fry at 802-658-6600 for a recommended fire service company near you to recharge the system.
Confirm the error clears
After the system is recharged the fryer beeps twice to signal OK and resumes HEATING.
When to call a professional
Recharging the PFS automatic extinguisher is not an operator task. Loss of pressure means the fire-suppression system cannot protect against an oil fire, so call Perfect Fry at 802-658-6600 for a recommended fire service company and have the system recharged by certified personnel per NFPA 17A. The extinguisher also requires monthly owner inspections and semi-annual professional service; never attempt to reset or bypass this fault yourself.
Stop searching through PDFs. Our AI assistant on WhatsApp is trained on official Perfect Fry documentation and can diagnose this fault code and guide you through the repair in minutes.
5 free questions per bot in your browser — no signup.
Other Perfect Fry Error Codes
SYSTEM ERROR - PLEASE CHECK FRONT PANEL: the hinged front panel is not installed or shut properly.
SYSTEM ERROR - PLEASE CHECK FILTER REPLACEMENT: the air filter cartridge is not installed properly.
SYSTEM ERROR - PLEASE CHECK GREASE FILTER: the grease filter is not installed properly.
SYSTEM ERROR - PLEASE CHECK HEATER BOX: the heating element is not installed properly.
SYSTEM ERROR - PLEASE CHECK AIR FLOW/AIR FILTER: there is improper air flow.
SYSTEM ERROR - PLEASE CHECK PRIMARY OVERTEMP: the heating element is not installed properly.
SYSTEM ERROR - PLEASE CHECK SECONDARY OVERTEMP: cooking oil level is too low or oil has overheated.
SYSTEM ERROR - PLEASE CHECK MAIN FAN: the main ventilation fan is not functioning properly.
SYSTEM ERROR - PLEASE CHECK CONTROL FAN: the control fan is not functioning properly.
SYSTEM ERROR - PLEASE CHECK EBOX FAN: the electronics box fan is not functioning properly.
SYSTEM ERROR - PLEASE CHECK DRAWER MOTOR: the drawer motor has been obstructed.
SYSTEM ERROR - PLEASE CHECK BASKET MOTOR: the basket motor has been obstructed.