Taylor Freezers dF Error Code
. 5F." F5 Set Metric or English Changes units to English or Metric units. Displa
Source: r280__taf-r280-english-spm.pdf
Stop searching through PDFs. Our AI assistant on WhatsApp is trained on official Taylor Freezers documentation and can diagnose this fault code and guide you through the repair in minutes.
5-day free trial — no credit card required.
Other Taylor Freezers Error Codes
"). If an error does occur, it is normally reset by pushing the Enter [ button.
to verify or change units (Ib. = pounds, After corrective g = metric). After ver
while the door is closed. Door Verify door switch operates. switch issue. Verify
Part Class 103 Parts' Limited Warranty Period Three (3) Months Class 212 Parts²
" if no password is set. (See Manager Function Menu Structure (U3) on page 17.)
Set Target Temperature Allows the cabinet target temperature to be changed. The
Set Password Allows a password to be set to access both manager and diagnostic f
Set Load Size Step Down Allows the load size step down time periods to be change
90) 294147 Left Basket Tray (used before Serial 1 # LONR1302E04090) 290687 Locat
" is displayed, then press the Enter [ not touching any metal in the compartment