Electrolux Professional GbbU
Boiler gas burner locked
Source: Electrolux Professional 3/UM_05UMC13_ENG01_SKLOVN_1_5_1_1_EPR_UMG_SkyLineOvens_ENG_20250617.pdf
What does Electrolux Professional GbbU mean?
GbbU means the boiler gas burner on a gas SkyLine oven has locked out, which blocks the boiler. The oven will not operate the boiler until burner function is restored. The causes mirror the cavity gas-burner alarms: air in the gas supply, a closed gas supply, an electrical supply problem, or an internal burner failure.
Symptoms
- GbbU displayed; boiler blocked
- Boiler gas burner not igniting
- Steam unavailable from the boiler
- May follow repeated ignition attempts
Common causes
- Air in the gas supply
- Gas supply is closed
- Issue with the electric supply of the burner system
- Burner system internal failure
Diagnostic steps
- 01
Switch the oven off and on
If the error occurs at cycle start, switch the oven OFF then ON.
- 02
Check the gas main valve
If the error occurs after five ignition attempts, check that the gas supply main valve is open.
- 03
Reset and retry
Reset the error and attempt a new cycle.
- 04
Power-cycle and retry again
If the error persists, switch the oven OFF/ON and attempt a new cycle again.
- 05
Call Service if it persists
If the error persists, call Service.
Keep this fix — get it by email with every Electrolux Professional error code
A clean printable version of this Electrolux Professional GbbU guide + the full Electrolux Professional code pack (29 codes), straight to your inbox. Free.
When to call a professional
Confirm the gas main valve is open and power-cycle the oven. Call an Electrolux Professional gas engineer if GbbU persists, since boiler gas-burner faults from air in the line, electrical supply problems, or internal burner failures require trained gas diagnosis. A locked boiler burner leaves steam unavailable, and gas repairs must be handled by a qualified technician for safety.
Don't want to DIY this? Open a service ticket on AskWhiz and get it handled — pay per ticket, no subscription.
Open a ticket — free accountOther Electrolux Professional error codes
Cavity safety switch triggered (TSC) — cavity over-temperature
EtUCCavity over-temperature (recoverable)
EtbBoiler safety thermostat trips — boiler over-temperature
EtUbBoiler over-temperature (recoverable / descale-related)
EbOLBoiler thermocouple failure
BoLtBoiler water loading timeout
BEtrBoiler excessive temperature-rise time (warning)
LPInBoiler level sensor problem
dESCDescale boiler — scale threshold reached (stops cycle)
dESSDescale boiler — scale build-up threshold reached (warning)
Eprb1Single-point core probe failure
Epr6Six-point core probe failure