AskWhiz
AL 09Jeros

Jeros AL 09

Overheating of wash water — temperature above 85°C

Source: 89000013_manual_9110_15_en.pdf

Want this fix in your inbox? Full AL 09 guide + every Jeros code, printable, free.

What does Jeros AL 09 mean?

AL 09 means the water-overheating protection has tripped. The manuals' key to error codes lists AL 09 = overheating of wash water, temperature above 85 °C, and AL 09 = overheating of rinse water, temperature above 97 °C. In the Danish original text, overheating of rinse water is listed as AL 10.

Symptoms

  • AL 09 shown on the operating panel display
  • Wash water temperature above 85 °C
  • Rinse water temperature above 97 °C

Common causes

  • Wash water overheated beyond the 85 °C limit
  • Rinse water overheated beyond the 97 °C limit

Diagnostic steps

  1. 01

    Stop and let the water cool

    The alarm indicates water beyond its temperature limit — pause operation until the temperature falls back into range.

  2. 02

    Switch the machine OFF and then ON again

    Power-cycle the machine — the manual's standard reset for panel alarms.

  3. 03

    If AL 09 reoccurs, call an engineer

    Recurring overheating means the heating control is not holding its limits — an engineer-level fault on these washers.

Keep this fix — get it by email with every Jeros error code

A clean printable version of this Jeros AL 09 guide + the full Jeros code pack (12 codes), straight to your inbox. Free.

I am a — required, one click

When to call a professional

A repeating AL 09 means the machine keeps overheating its water — call an engineer rather than resetting repeatedly. Water that will not hold its temperature limit points at heating-control faults the operator sections of the Jeros manuals do not cover.

Don't want to DIY this? Open a service ticket on AskWhiz and get it handled — pay per ticket, no subscription.

Open a ticket — free account

Other Jeros error codes

AL 01

Temperature sensor in wash tank disconnected or short-circuited

AL 02

Temperature sensor in rinse tank disconnected or short-circuited

AL 03

Thermal cut-out in wash pump 1 tripped — wash pump overloaded

AL 04

Thermal cut-out in wash pump 2 tripped — machine can continue at reduced operation

AL 05

Thermal cut-out in rinse pump triggered — machine can continue at reduced operation

AL 06

Wash frame motor malfunction — disconnected, short-circuited or travel time exceeded

AL 07

Lid contact malfunction — not switching

AL 08

Lid hoist's maximum travel time exceeded

AL 10

Overheating of rinse water — temperature above 97°C

AL 11

Filling time for rinse tank exceeded

AL 13

Incorrect phase sequence — reverse L1 and L2 at the main switch

View all Jeros error codes →

AskWhiz Playground

Test your diagnostic skills

Play a real HVAC service call in the AskWhiz Playground — real brands, real fault codes, no signup.

Play a real service call