What does RM Gastro E1 mean?

On RM Gastro induction ranges, E1 marks an anomaly detected by the generator (the induction power board) and handed to the control. On digital models “E1” shows on the display followed by a sub-number; on analogue models the green light flashes a count that equals the error number while the red light stays on.

What does RM Gastro E2 mean?

E2 indicates an error caused by the digital management system on RM Gastro induction ranges fitted with digital control. The display shows “E2” and the error number.

What does RM Gastro E3 mean?

E3 codes come from the 7-segment display module on RM Gastro induction ranges. Sub-codes cover a damaged display (system integrity), display supply-voltage problems, display internal temperature too high, an open LIN bus with no communication, and a LIN bus collision from an address or configuration conflict.

Does AskWhiz cover RM Gastro equipment?

Yes. AskWhiz is trained on official RM Gastro service and operator documentation, so it can answer fault-code, error-message, and repair questions for RM Gastro commercial kitchen equipment directly in WhatsApp.

How do I troubleshoot RM Gastro error codes?

Send AskWhiz your RM Gastro model number and the error code or symptom on WhatsApp. It searches the official RM Gastro manuals and returns the likely cause and the documented fix, step by step, so you stop scrolling through PDFs in the field.

Is AskWhiz a substitute for the RM Gastro service manual?

No. AskWhiz reads the official RM Gastro documentation and surfaces the relevant procedure fast, but always follow the manufacturer safety warnings and call a qualified RM Gastro technician for work that requires one.

Commercial Kitchen

RM Gastro error codes, decoded.

Look up any RM Gastro fault code below. Each one is grounded in RM Gastro's own service documentation — the meaning, the symptoms, the causes, and the steps to clear it.

By Nichita Herput

Co-founder & CEO · Reviewed May 2026

Working on a RM Gastro unit? The complete RM Gastro code pack in your inbox — free.

RM Gastro sits in our Commercial Kitchen coverage. Every page here is transcribed from the manufacturer's manuals, not scraped from forums.

What error codes does RM Gastro display?

Tap a code for the full breakdown — meaning, symptoms, causes, and fix steps.

Generator error on an induction cooking range — a fault detected by the generator (power board), shown as “E1” plus a sub-number.

Digital-control error on an induction cooking range — a fault in the digital management/keypad system, shown as “E2” plus a sub-number (digital-control models only).

7-segment display error on an induction cooking range — a fault reported by the 7-segment display module, shown as “E3” plus a sub-number.

Coil module error on an induction cooking range — a fault reported by the induction coil module, shown as “E4” plus a sub-number.

Get the complete RM Gastro error-code pack by email

Every RM Gastro code, meaning and first checks in one document you can save, print or forward. Free.

Common questions about RM Gastro equipment

Other Commercial Kitchen brands we cover

AskWhiz documents error codes for these manufacturers in the same vertical:

Accutemp Alto-Shaam Beverage-Air Blodgett Brema Ice Makers Bunn Cleveland Range Continental Refrigerator Convotherm Cornelius Delfield Electrolux Professional